Máquina de corte y sellado ultrasónico de 40 khz
Máquina de corte y sellado ultrasónico de 40khz


Descripción:
Los materiales aplicables de sellado y corte por ondas ultrasónicas incluyen: 100 por ciento de fibra sintética, como nailon, poliéster, polipropileno, algo de polietileno, resina acrílica modificada, compuestos de vinilo, compuestos de carbamato, películas delgadas, papel estucado, etc. También incluye materiales sintéticos mezcla de fibra del 35 al 50 por ciento de la composición de fibra sintética. El ultrasonido puede cortar y coser al mismo tiempo, evitando que los materiales tejidos o textiles queden fuera de línea-. Tiene borde ranurado que evita la formación de bolitas. La aplicación incluye corte, adornos de alfombras, etiquetas de ropa, cortinas, materiales de cable y cinturones tejidos industriales, etc.
Parámetros:
Frecuencia | 30/40 kHz |
Energía | 500W 800W |
Aporte | AC110-240V, 50/60Hz |
Power Controller | stepping or continuous |
Material Of Cutting Head | aluminum alloy, stainless steel, titanium alloy, alloy steel. |
Machine Wight | 4 kg-16KG |
Accesorios | foot switch, additional blade |
Cooling Device | compressed air mouth can be installed. |
Cable Length | 2M or customized |
Foot Switch | disponible |
Principio: With ultrasonic sealing, the heat required for melting is only generated inside the thermoplastic sealing layer. For localized conversion of vibrations to friction heat, the anvil or sonotrode profiles are mostly linear. These profiles ensure focusing of the energy input and therefore short sealing times between 100 and 200 milliseconds. With ultrasonic sealing heat is generated at the inside of the film, not by heat input from the outside as is the case with heat sealing, for example. The tools (sonotrode and anvil) that come into direct contact with the packaging material, remain cold during the entire weld process. The support layer remains almost cold and upon termination of energy input, the heat dissipates faster to the outside due to the temperature difference between the support layer and the sealing layer so that the hot-tack resistance is significantly higher.
Ventajas competitivas:
1. Cut the material quickly and precisely; 2. Smooth and traceless cutting edge;
3. Powerful, effective realiable;
4. Low cost, easy operator, An operator only handle the probe and step the foot switch.




Etiqueta: Máquina de corte y sellado ultrasónico de 40 khz, China, fabricantes, proveedores, fábrica
Artículo anterior
Diseño portátil mano Earloop Spot Welding MachineTambién podría gustarte
Envíeconsulta













